石墨烯/銀納米復合膜對非晶態Mg-Ni-La貯氫合金的表面改性及機理

石墨烯/銀納米復合膜對非晶態Mg-Ni-La貯氫合金的表面改性及機理Surface modification and mechanism research of amorphous Mg-Ni-La hydrogen storage alloy with graphene/Ag nanocomposite

采用熔體快淬法制備Mg65Ni27La8非晶電極合金帶，采用氧化還原法成功制備石墨烯/納米銀復合膜(G/A)，通過高能球磨將G/A膜成功引入電極合金進行表面包覆改性。通守X射線衍射儀、場發射掃描電鏡、激光拉曼光譜儀和高分辨電鏡表征顯示：還原后的石墨烯呈卷曲的大片層結構，尺寸在2~5 μm之間，銀納米顆粒均勻地分散在石墨烯片層上，尺寸在10~20 nm之間。用恒流充放電的方法在三電極電池測試儀上測定其電化學循環性能，實驗結果表明改性后合金表面的氧含量由21%降低為包覆后的10%，G/A膜有效阻止合金表面的腐蝕和粉化開裂，包覆改性后電極合金的極限電流密度提高了2.54倍，電極的接觸阻抗降低87.2%，電極合金的最高放電容量由610.8 mA？h/g上升為814.8 mA？h/g，經過20個循環后的放電容量保持率由79.86%提升為85.76%，顯著提高其電化學性能。

A new graphene/Ag (G/A) nanocomposite additive was prepared successfully through oxidation/ reduction method. Mg65Ni27La8 amorphous alloy was prepared by melt spinning. The amorphous alloy was successful modified with G/A through high energy ball milling. The G/A was characterized by high-resolution transmission electron microscopy (HRTEM), X-ray diffractometry (XRD), Raman spectrometry and scanning electron microscopy (SEM), respectively. The results show that a coiled structure is present with the size between 2-5 μm for graphene, the silver nanoparticles with the size of 10-20 nm evenly disperse on the graphene sheets. The electrochemical performance determination is executed on the three electrode cell tester. The experimental results show that the oxygen content on the surface of the modified alloy decreases from 21% to 10%, the G/A film can effectively prevent alloy from corrosion and cracking, the limiting current density of modified alloy increases by 2.54 times than that before surface modification, the contact electrode impedance is reduced by 87.2%, the highest discharge capacity of the modified alloy increases from 610.8 to 814.8 mA？h/g, the discharge capacity retention rate of 20 cycles increases from 79.86% to 85.76%, significantly improves its electrochemical performance.

全文下載：https://pan.baidu.com/s/1dzfoTlfC5iGy5KE878bOuQ?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.