5083鋁合金熱壓縮應力-應變曲線修正與熱加工圖

5083鋁合金熱壓縮應力-應變曲線修正與熱加工圖Correction of flow stress-strain curve and processing maps of 5083 aluminum alloy during hot compression

在Gleeble-3500熱模擬試驗機上對圓柱體5083鋁合金試樣進行溫度為300~500 ℃、應變速率為0.001~ 1 s-1條件下的熱壓縮試驗。對實驗獲得的真應力應變曲線進行摩擦修正,依據摩擦修正后的應力應變曲線計算本構方程，采用包含Zener-Hollomon參數的本構方程描述摩擦修正后的5083鋁合金流變應力行為,其熱變形激活能為164.17 kJ/mol。根據摩擦修正后的真應力-應變曲線繪制熱加工圖，隨著真應變的增加,失穩區域向著高應變速率、高變形溫度區域擴展，5083鋁合金適宜熱變形工藝參數：變形溫度為400~500 ℃、變形速率為0.01~0.1 s-1與340~450 ℃、變形速率為0.001~0.01 s-1。隨著變形溫度升高與應變速率降低，晶粒內位錯密度減少，主要軟化機制逐漸由動態回復轉變為動態再結晶。

The hot compression tests of the cylindrical 5083 aluminum alloy sample were carried out on Gleeble-3500 thermal simulator at the temperature range of 300-500 ℃ and the strain rate range of 0.001 s-1. The real stress and strain curves obtained by the experiment were subjected to friction correction. The constitutive equation of Zener-Hollomon parameters was used to describe the flow behavior of 5083 aluminum alloy after friction correction and activation energy of the thermal deformation is 164.17 kJ/mol. According to the friction correction of the true stress-strain curve drawing the processing map, finding that the unstable region expands toward high strain rate and high deformation temperature with the increase of true strain. The suitable thermal deformation process parameters of 5083 aluminum alloy are as follows: deformation temperatures of 400-500 ℃ at deformation rates of 0.01-0.1 s-1and deformation temperatures of 340-450 ℃ at deformation rates of 0.001-0.01 s-1.With the increases of deformation temperature and strain rate, the dislocation density within the grain decreases, and the main softening mechanism gradually changes from dynamic recovery to dynamic recrystallization.

全文下載：https://pan.baidu.com/s/1sQWegbHjH_v_auDhqvI_Tg?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供優秀的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the superior alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-3113 6111或發電子郵件service@txco.ltd聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-3113 6111 or email us at service@txco.ltd. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.