連續冷卻對7020合金組織與性能的影響

連續冷卻對7020合金組織與性能的影響Effect of continuous cooling on microstructures and properties of 7020 alloy

采用掃描電鏡和透射電鏡觀察、電阻率和硬度測試等手段，研究連續冷卻條件對7020合金時效組織性能的影響，并繪制實驗合金的CCT圖。結果表明：實驗合金的連續冷卻脫溶產物主要包括GP區、η′相和η相，高溫階段主要對應η相在彌散粒子、晶界等異質形核質點上的優先析出，中溫階段主要對應η相在基體內均勻析出，低溫階段則主要對應GP區、η′相的析出，實驗合金的臨界冷卻速率達到700 ℃/min以上。不同冷卻條件引起析出相組態的變化，導致合金的硬度和電阻率隨冷卻速率降低而發生相應的變化。較慢冷卻速度下的脫溶會消耗溶質原子，從而導致時效驅動力下降，而合適的冷卻速率下形成的亞穩相則可作為時效強化相的前驅體，能夠加速時效強化相析出，導致合金的時效硬化曲線峰值時間提前。

The effect of continuous cooling process on aging microstructure and properties was investigated by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), electrical resistivity and hardness test. The results show that the continuous cooling precipitations for 7020 alloy are GP zones, η and η′ phases. The high temperature transformation corresponds to the heterogeneous precipitation of η phase. The medium temperature zone corresponds to the homogeneous precipitation of η phase. While, GP zones and η′ phases are precipitated in the low temperature zones. The critical cooling rate for 7020 alloy inhibiting any cooling precipitates is more than 700 ℃/min. The hardness and electrical resistivity change with the extending of cooling ending time with the extending of cooling ending time, since the different microstructures induce by different cooling processes. The precipitation of metastable phases during the cooling process leaded to an earlier peak hardness value is observed. However, extremely slow cooling processes will lead to the significant consumption of alloy atoms, in which the driving force for aging precipitation decreases.

全文下載：https://pan.baidu.com/s/1_TqL5jTxMtyg4LgOIuUonw?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.